9.
Adjust the open position stop piece
a.
Slightly loosen three screws (A) of the open position stop piece, but do not remove
them. In case the stop piece (B) clamps, the latter can be loosened by giving a slight
hit onto the screw heads.
b.
Open the door leaf to the desired maximum opening angle.
c.
Turn the stop piece till it stops and retighten the screws (6Nm).
1.
Open the door leaf and let it close by means of the drive. If required, adapt the spring
prestressing, ideally by using a ratchet ring spanner SW17.
Important: The motor damping must be active, respectively the motor cable must be
inserted!
B
A