QuantAsylum QA401, Руководство пользователя

Страница: 68 / 70

QuantAsylum QA401 User ’s Manual
Page
68
Appendix 4: Regulatory Notice
Overview & Safety
This device is test equipment, designed to be used in a laboratory setting. It is used to examine the
signal characteristics of non-lethal voltages in other equipment, powered from low-energy circuits.
It is the responsibility of the user to understand what they are measuring, how it might interact with the
test equipment and what voltages might be generated by their measurements.
Environmental
This device is manufactured using RoHS certified parts from leading vendors, assembled in the USA using
RoHS certified assembly procedures. The case is powder-coated aluminum, the front panel is anodized
aluminum. This device should be disposed of as you would dispose a personal computer or any other
electronic device in your community.
Power Supply
This device does not operate from line or mains voltage. It is designed to be powered from a low-power
USB connection. Maximum internally generated voltages do not exceed 12V in magnitude
Shock Hazard
This device does not pose a shock hazard when used as recommended. This device is not intended to be
used for measuring devices that pose a shock hazards. If you measure something that does pose a shock
hazard, assume the QA401 will provide little assistance in isolating you from that shock hazard.
FCC
Test and measurement equipment is exempt from FCC compliance standards because it is used to work
on open and unshielded equipment which, by definition, is likely unshielded and not operating as
designed with respect to EMI. The FCC exemption is explained in CFR 47, part 15.103(c):
(c) A digital device used exclusively as industrial, commercial, or medical test equipment.