QUANTA STRATOS S200 Series S200-X12TS, Техническое руководство

Страница: 140 / 245

BIOS C
LEAR
CMOS
3-45
BIOS Recovery Completed
Reboot the system with the new BIOS.
Clear CMOS
The following steps will load the BIOS defaults by jumber:
1. Power down the system.
2. Move CMOS clear jumper from pins 1-2 to pins 2-3 for a
few seconds. See
Mainboard Jumpers
.
3. Move CMOS clear jumper back to pins 1-2. See
Main-
board Jumpers
.
4. System automatically powers on.
5. Check BIOS defaults are loaded.
Clear Password
1. Power down the system.
2. Move password clear jumper from pins 1-2 to pins 2-3.
See
Mainboard Jumpers
.
3. Power on the system.
4. Make sure password is cleared.
5. Power down the system.
6. Move password clear jumper from pins 2-3 back to pins 1-
2. See
Mainboard Jumpers
.
7. Power on the system.
8. Set new password.
Version 2.14.1219 - Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Security Save & Exit Recovery Chipset Server Mgmt Boot
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
WARNING! System firmware is being updated.
Keyboard is locked.
DO NOT TURN THE POWER OFF !!!
Once firmware update is completed
press any key to reboot the system
Flash update progress completed.