QUANTA QSSC-980, Руководство пользователя

Страница: 15 / 138

Preface
Overview
B
B
e
e
f
f
o
o
r
r
e
e
Y
Y
o
o
u
u
B
B
e
e
g
g
i
i
n
n
i
WARNING!
Before removing the server cover, disconnect all power, unplug the AC power cord,
disconnect all peripherals, and all LAN lines.
Make sure you have a stable, clean working environment. Dust and dirt can get into system components and cause
a malfunction. Many of the screws on the server are different sizes; use containers to keep screws and small com-
ponents separated.
Adequate lighting and proper tools can prevent you from accidentally damaging internal components. Most of the
following procedures require only a few simple tools, including the following:
A Philips screwdriver
A flat-tipped screwdriver
A grounding strap
An anti-static pad
Most of the electrical connections can be disconnected by using your fingers. It is recommended that you do not
use needle-nosed pliers to disconnect connections as these can damage the soft metal or plastic parts of the con-
nectors.
Before working on internal components, make sure that the server power is off. Ground yourself before touching
any internal components, by touching a metal object. Static electricity can damage many of the server’s electronic
components. Humid environments tend to have less static electricity than dry environments. A grounding strap is
warranted whenever danger of static electricity exists.