Quanmax TOUCH TOY, Сетевое руководство

Страница: 3 / 14

2.2 Touch Toy registration
To register a Touch Toy, only 2 steps are necessary:
• Step 1 - Choose connection
• Step 2 - Register terminal
2.2.1 Choose connection
It is important to configure the internet connection first, in order to be able to implement the Touch Toy regis -
tration data afterwards. To do this, select menu item „Step1 - Choose connection“ to configure the existing
internet connection.
The following options are available:
• ADSL -> Internet connection with DSL Modem (PPPoE, PPTP)
• LAN -> Internet connection with local network (LAN, DHCP Server/Router)
• WLAN -> Internet connection with wireless local network (DHCP or manual IP-configuration
possible)
• UMTS -> Internet connection with UMTS modem
2.2.2 Internet connection with modem (analogue/ISDN)
1. Modem
In the selection field „Modem“ press Edit-button - a list of all connected modems is displayed.
Select connected modem and press OK-button
6
2. Number to get an outside line
If you need a number to get an outside line enter the number here (e.g. 0).
Therefore press Edit-button in the selection field „number to get an outside line“ - enter
required number and press OK-button
3. Initstring (AT-command)
AT-commands are an instruction code for intelligent modems
Intelligent modems can be configured or steered by AT-commands
4. Touch Toy NET telephone number
Select dial in number to the internet provider
In the selection field „Touch Toy NET telephone number“ press Edit button - select dial in number
for the internet provider and press OK-button
5. Transfer settings
In the selection field „Transfer settings“, press Edit-button
Define the daily time period and how often each day the network data of the Touch Toy terminal should be
updated.
e.g. Start time: 12:00
End time: 23:59
Number of transmissions: 5
i.e. every day between 12:00 and 23:59 the network data of the Touch Toy terminal will be updated for 5
times. The game mode will not be interrupted during data transfer. To save settings and exit menu, press
Store-button
6. Connection test
With the Connection test method it‘s possible to verify the networkconnection immediately
2.2.3 Internet connection with ADSL (DSL)
If the ADSL type of connection was selected, there is a choice between two possibilities:
• ADSL via PPTP
• ADSL via PPPoE
Basic information for Touch Toy terminals equipped with an ADSL-connection
ATTENTION: No USB ADSL modem / router is supported!
Touch Toy hardware only supports Ethernet modems/routers
(a connection of an ADSL modem/router with the Touch Toy network adapter has to be provided by an
Ethernet network cable).
If no DHCP-router is connected with the ADSL modem, the ADSL network settings must be configured
manually.
7