QUANCHAI N485D, Руководство по обслуживанию

Страница: 74 / 139

ANHUI QUANCHAI ENGINE CO., LTD
Chapter 6 Fuel supply system
1. Maintenance equipment and tools
Note:
Introduction of special tools: 13-16 wrench and 18-21 wrench
2 Torque requirements and dimensional data
2.1 Torque requirements
Item Unit Parameter Note
Connecting of the fuel
injection pump to the gear
chamber
N.m 70
2.2 Dimensional data
This data is given to the personnel for engine overhaul, and the dimensions shown are primarily for the
factory.
Fuel injection pump gear
Number of teeth--------------------------------------------------------------- 56
Diameter of hole ------------------------------------------------------------- 50 mm