QUANCHAI N485D, Руководство по обслуживанию

Страница: 112 / 139

ANHUI QUANCHAI ENGINE CO., LTD
6. Test on engine oil pressure
Reason:
It is for determining whether the bearing or
lubrication system components are worn.
Equipment:
JDG465 Special sleeve
JT05577 Pressure gauge assembly
JT03017 Hose assembly
JT05487 (XXX Test kit)
JDG282 Thermometer
Connection:
1. Remove the engine oil pressure sensor
Note: The thread is 1/8 of that of the conical pipe,
and special joint JT05487 and hose shall be used
for connection with pressure range of 0-700 kPa
(0-6.9 bar) (0-100 psi).
2. Install JT05487 XXX testing tool
3. Connect JT05577 pressure gauge assembly and
JT03017 hose assembly
Important note: If the pressure reading is less
than 72 kPa (0.72 bar) (10.5 psi), the engine
will shut down.
4. Install the JDG282 thermometer at the engine
oil filter element.
Note: When the engine and oil pressure gauge
work under extreme conditions, the reading of the
oil pressure gauge will reach 582 kPa (5.82 bar)
(85 psi). That will not cause damage to the engine.
5. Run the engine for about 5 min, and check the
engine oil pressure after the temperature of the
engine oil reaches specified value.