Qualstar Q24, Инструкция по установке и эксплуатации

Страница: 52 / 103

Q24 Tape Library Installation and Operations Manual
© Copyright QUALSTAR 2014 43
Figure 42 Network configuration
Changes that can be made are:

Host Name: In this box enter the name you wish to use to address this library in the future. It is
recommended that you use a name that is relevant to its location and/or its purpose. The Host
Name may be up to 15 characters long.
Allowed characters are: [A‐Z], [a‐z], [0‐9], hyphen [‐] and period [.]
Disallowed characters are: hyphen [‐] as the first character, blanks or consecutive hyphens [‐]
 Domain Name: In this box is the domain in which the library is registered. It may be updated by
editing the name and submitting the changes. The Domain Name may be up to 39 chars long.
Allowed characters are: [A‐Z], [a‐z], [0‐9], hyphen [‐] and period [.]
Disallowed characters are: hyphen [‐] as the first character, blanks or consecutive hyphens [‐],
blanks or consecutive hyphens [‐] as the first or last character of a
label (A period [.] is the delimiter of domain name labels!)
The sum of characters of the Host Name and the Domain Name may not exceed 15+39=54 chars.

IPv4
o
DHCP Address Enabled ‐ Used to set the RMU to seek an assigned IP address from the
network’s DHCP server.
o
Static Address ‐ This field is only active with DHCP address off (unchecked), a static IP
address may be programmed in this field.
o
Subnet Mask ‐ Used to set the Network Mask, contact your Network administrator to receive
this setting address if required.