Qualstar Q24, Инструкция по установке и эксплуатации

Страница: 51 / 103

Q24 Tape Library Installation and Operations Manual
© Copyright QUALSTAR 2014 42
3.2.7.3 Changing the License Key configuration
This page allows the user to add additional functionality to the unit by entering license key
information. Please contact your supplier to see if this functionality is applicable in your system.
Figure 40 License key
3.2.7.4 Changing the Drive configuration
This page shows the current configuration of all tape drives in the library and allows modification to
the configuration. The user is also able to select the <Power On> check box through this page to
activate the drive.
Figure 41 Drive configuration
3.2.7.5 Changing the Network configuration
This page shows the current network configuration of the library related to the RMU access and allows
modification to the configuration. When a change is requested, a pop‐up window will ask you to
confirm the changes.
CAUTION

Changes in this menu may affect the ability to access the RMU
interface unless the correct IP address is resolved.