SOFTPRO INSTALLATION GUIDE
©2020 Quality Water Treatment. All rights reserved.
2
.
(Follow either (A) Quick-Connect Kit, or (B) Standard connection instructions below.
(A)
QUICK-CONNECT KIT INSTALL
If using the optional quick-connect kit/ hoses*, follow below.
a)
Connect the quick connect hoses to your plumbing pipes.
Bend the quick connect hose lines from the plumbing to align with the bypass valve.
b)
Attach the appropriate water lines to appropriate sides of the bypass valve.
i.
The water supply line connects to the INLET side of the softener valve.
a.
NOTE:
For optional whole house filter, connect to the INLET side of the filter valve (not the
softener valve).
ii.
The treated soft water line connects to the OUTLET side of the softener bypass valve.
iii.
Attach the quick-connect hose ends into the bypass valve.
e)
For the optional Whole House Filter Installation, if applicable
, complete the filter connection to the
water softener. (Skip to the next step if not applicable.)
i.
If using Quick-Connect hose, then connect
ii.
Plumb the filter OUTLET side to the water softener INLET side.
1.
Use optional Quick-Connect hose. (Filter hose bib is not required.)
2.
If optional Quick-Connect hose is not provided, then plumb a hose bib with “T” fitting in
between the line from the filter and softener valves.
iii.
Verify that the filter bypass valve is in the bypass position
.
a)
For the optional Whole House Filter Installation, if applicable
, complete the filter connection to the
water softener. (Skip to the next step if not applicable.)
i.
Plumb the filter OUTLET side to the water softener INLET side.
1.
Plumb a hose bib with “T” fitting in between the line from the filter and softener
valves.
ii.
Verify that the filter bypass valve is in the bypass position.
c)
Plumb the appropriate water lines to appropriate sides of the bypass valve.
iv.
The water supply line connects to the INLET side of the softener valve.
a.
NOTE:
For optional whole house filter, connect to the INLET side of the filter valve (not the
softener valve).
v.
The treated soft water line connects to the OUTLET side of the softener bypass valve.