SOFTPRO INSTALLATION GUIDE
©2020 Quality Water Treatment. All rights reserved.
2
.
e)
Attach the two connection fittings onto the bypass valve.
ATTENTION
:
At a latter step, after the water softener is set up, then plumb the OUTLET side of the carbon filter
to the INLET side of the water softener valve. This will be instructed later.
Note: If tank is not straight, lift tank of ground a few inches and tap the bottom of tank on ground in the direction you
need it to go, the bottom tank base is adjustable.
The whole house carbon filter setup is complete.
ASSEMBLE YOUR SALT FREE WATER SYSTEM
1)
Remove the protective cap from the top of the carbon filter tank
