Qualitel Symphony, Инструкция по эксплуатации

Страница: 6 / 12

5
Pre-dialing function
1. When the handset is on the base, dial the desired number using the numerical keypad.
2. If an incorrect digit is entered, use the
DEL button to edit the number.
3. Press key or pick up the handset and the number will be dialed automatically.
Redial
1. Pick up the handset or press key
2. Press the RD button, the last dialed number will be dialed again.
MENU SETTINGS
In on-hook state, press MENU button to enter menu settings, LCD will display VIEW MENU ↑↓ .
Use ▲ or ▼ keys to select among different settings. When you select an item, press MENU
button again to enter into this setting. After editing an item, press the MENU button again to
confirm the setting and move to another item. To quit the settings menu at any time, press the
DEL button.
NOTE: The system will time out if you do not enter anything for longer than 5 seconds.
The editing of different items is shown in detail as follows:
¾ Language
1. In on-hook state, press the MENU button then press the ▲ key once, the LCD will display
SELECT LANGUAGE
2. Press MENU , you will see ENGLISH displayed on the LCD as the default menu language
setting.
3. Use the ▲ or ▼ keys to select the language as required, and press MENU to confirm your
selection.
¾ Area code settings
1. In on-hook state, press the MENU button then press the ▲ key twice, the LCD will display
SET AREA CODE
2. Press MENU , you will see ----- displayed on the LCD (or the preset area code) and the first
‘-’ flashing. If you have already set the area code, the LCD will display the preset code and
the first digit of the code will flash.
3. Use the ▲ or the ▼ keys to edit from 0 to 9, and then press MENU again to confirm.
Repeat the above to set the rest of the area code digits. A total of 5 digits can be entered.
The phone will automatically filter the area code upon receiving an incoming call of which the
first digits are same as the set area code.
¾ Long distance code setting
1. In on-hook state, press the MENU button then press the ▲ key three times, the LCD will
display LONG DIST ACCESS
2. Press the MENU button, you will see ------ displayed on the LCD (or the code you set the
last time) and the first ‘-’ flashing. If you have already set the long distance code, the LCD
will display the preset code and the first digit will flash.