Qualitel Symphony, Инструкция по эксплуатации

Страница: 12 / 12

11
When dialing, press VIP/P key to insert a 3.6s pause time between the dialed numebrs.
LCD BACKLIGHT FUNCTION
The LCD Backlight is turned on upon receipt of an incoming call, dialing, pressing any key or in
the music on hold state. The backlight fades after 6 seconds if no keys are pressed.
Note: The backlight only functions if batteries are installed.
LOCK FUNCTION
Turn the key to green, all numbers starting with “0” are locked.
Turn the key to red, all numbers are allowed to be dialed out.
* Emergency numbers starting with "1" such as 10111, 10177 can be dialled on both lock positions.
TROUBLE SHOOTING
No Dial Tone * Check hook switch to make sure it pops up
Can’t dial out * Make sure Tone/Pulse is set to correct position according to telephone
exchange requirement
* Unplug the phone, wait 30 seconds and plug the phone back in
* Check the phone line cord
* Check that all connectors are firmly inserted in their sockets.
Phone does not ring
* Check the phone line cord
* Could have too many phones on one line (the total REN of all
phones should not be greater than the maximum for your area,
usually 5).
Last number redial and/ * When you first make a call try pressing the Pause Button for a
or Memory dialling don’t pause between the outside line access digit (eg: 9 or 0) and the
work on a PABX telephone number, you should later be able to redial the number.
* If your PABX requires you to wait for a second dial tone before
dialling the telephone number, press the Pause Button for a
pause between the access digit and number.
LCD is dim * Check if the batteries need replacing
* Check if the contrast is set correctly