Qualitel QT6131, Инструкция по эксплуатации

Страница: 7 / 14

7
Pre-dialing function
1. Without lifting the handset, dial the desired number using the numerical dial pad.
2. If a digit was entered incorrectly, use the DEL key to delete the digit.
3. Press the key or pick up the handset for the number to be dialed automatically.
Redial
1. Pick up the handset or press the key.
2. Press the REDIAL key, the last dialed number will be dialed again.
MENU SETTINGS
In on-hook state, press the MENU key to enter into menu settings, the LCD will display VIEW MENU
↑↓
. Use
the UP or DOWN keys to scroll among different settings. To select a setting press the MENU key again. After
editing, press the MENU key again to confirm and move to another setting. Press the DEL key to exit the
menu.
Note: 1) The system will time out after 5 seconds if no key is pressed and revert back to the default display
on the LCD.
Note: 2) On hook state = the handset of the telephone is on the cradle.

Language
1. In on-hook state, press the MENU key then press the UP key once, the LCD will display SELECT
LANGUAGE
2. Press the MENU key and ENGLISH is displayed on the LCD as the default language setting.
3. Use the UP or DOWN keys to select the required language and press the MENU key to confirm your
selection.

Area code settings
1. In on-hook state, press the MENU key then press the UP key twice, the LCD will display SET AREA
CODE
2. Press the MENU key ----- will appear on the LCD (or the previously set area code will appear) and the
firs
t „-‟ flashing, or the first digit will flash of the previously set code.
3. Use the UP or DOWN keys to enter a digit from 0 to 9, and then press the MENU key again to confirm.
4. Repeat the above procedure to set the rest of the area code. A total of 5 digits can be entered.
Upon receipt of an incoming call with the same area code as the set area code, the code will be automatically
filtered.

Long distance code setting
1. In on-hook state, press the MENU key then press the UP key three times, the LCD will display LONG
DIST ACCESS .
2. Press the MENU key, ------ is displayed on the LCD (or the previously set code
) and the first „-‟ flashing or
the first digit of the previously set long distance code.
3. Press the UP or DOWN keys to edit a digit 0 to 9, and then press the MENU key again to confirm.
Repeat the above process to set the rest of the code.
Once a long distance code has been entered, press the REDIAL key twice to dial the number with the long
distance code ahead of the number in REDIAL mode.