Qualitel QT6131, Инструкция по эксплуатации

Страница: 5 / 14

5
INSTALLATION
1.
Plug one end of the line cord into the connector marked “line” on the base of the telephone and the other
end into the wall socket.
2. Plug one end of the curly cord into the handset and the other end into the handset connector on the side
of the telephone base.
3. Select your preferred ringer volume (High, Medium or Low). Set the ringer slide switch at the back of the
phone to adjust the volume.
4. Select your preferred handset volume (set the volume slide switch HI/MID/LOW)
5. Select the correct flash time.
Follow the instructions under “menu settings” in this manual to set the flash
time. Normally the flash time should be set to 100 for a flash time of 100ms.
WALL MOUNT INSTALLATION
1. The telephone can be wall mounted.
Press both points marked „PUSH‟ to remove the plastic stand-off.
Once the plastic stand-off is removed the mounting slots for the wall mount screws will be visible. Mark
two points 108mm apart on the wall. Drill holes into the wall 108mm apart. Insert plugs and screws (not
included) in the wall and clip in the telephone base by inserting the screws into the wall mount slots at the
back of the telephone base. Adjust the screws if necessary.