Qualis Audio Sentine, Руководство пользователя, Страница: 74 / 108

68 User Manual
CF and LFE Swapped If
LFE Bandwidth > CF Bandwidth For Longer Than Sets duration that the
LFE bandwidth must exceed the CF bandwidth to generate a
CF/LFE Swap error. The choices are 1, 3, 10 or 30 seconds.
Digital Input Has No Signal If
Values Repeat For More Than Sets the number of samples in a row that
must have the same value to generate an error. The choices are
16k, 32k, 64k or 128k.
Downmix Compatibility settings panel
The Downmix Compatibility settings panel sets the downmix parame-
ters and the thresholds used for compatibility checking. It controls the
downmix gains used for deriving the downmix channels. These down-
mix channels are used for both the meter displays and the compatibility
analysis.
Downmix Parameters
LFE Gain Sets the gain applied to the LFE signal when performing
downmix compatibility measurements. It does not affect the
LFE meters, which always reflect the actual electrical level of
the LFE signal, not its final reproduction level. The choices are
0 and +10 dB.
Downmix CF at Sets the gain applied to the center front signal when
downmixing to stereo. The choices are +3, +1.5, 0, −1.5, −3,
−4.5, −6 dB, and none.
Downmix Surrounds at Sets the gain applied to the surround and back
channels when downmixing to stereo. The choices are +3,
+1.5, 0, −1.5, −3, −4.5, −6 dB, and none.
Use Downmix Gains Selects between the specified downmix gains and
the values specified in the metadata. If the metadata is missing
or if the values are not indicated, the software will revert to the
values set above.