Qualis Audio Sentine, Руководство пользователя, Страница: 47 / 108

Readings page 41
Signal traces
The timeline displays your choice of Program Loudness and Maximum
Downmix measurement traces. The loudness trace displays short-term
loudness. The downmix trace displays the maximum of left and right
downmix values within the frequency range configured in the Downmix
Compatibility settings panel (p. 68).
A programming segment trace appears below these traces. It shows
the breakdown of the readings into programming segments for inte-
grated loudness measurements. The lower half of the trace indicates
program segment measurements; it's shadowed wherever the mea-
surement was paused. The upper half indicates commercial segments.
Breaks in the traces mark the positions where measurements were
reset.
A summary trace of error and alarms is also always visible as the last
trace. It shows a yellow marker at each reading that records an error. If
the error resulted in an alarm, a red marker appears above the yellow.
Cursors
1. Current position cursor.
Appearance changes
to indicate play/paused
state (paused shown).
2. Left bound cursor.
3. Right bound cursor.
4. Right position flag
(appears when cursor is
dragged).
Trace cursors consist of a single current position cursor, which is
always present, and zero or more pairs of segment bounds cursors.
Current Position cursor
Displays the current play position. When the cursor is positioned at the
current time, the display shows live readings and the cursor position
advances automatically. Dragging the cursor away from current time
changes to paused state, freezing the motion of the meter and timeline
displays. Dragging when replaying saved readings changes the replay
position, and replay continues when the cursor is released.