Qualis Audio Sentine, Руководство пользователя, Страница: 35 / 108

Readings page 29
True peak readings which reach the user defined clip level will produce
a CLIP indication on the bar meter of the corresponding input channel.
The configuration pulldown menu for the Meters panel allows you to set
the Peak Hold Time from 1 to 30 seconds.
Bandwidth indicators
The input channel bargraphs have a graphic below the channel label
which gives an approximate indication of signal bandwidth. This allows
a quick assessment of which channels are dominated by dialog and
which have extensive music or effects content. The left edge of the
graphic is controlled by the low frequency signal content. The right
edge of the graphic is dependent on the high frequency signal content.
The color also changes with the low and high frequency energy, giving
two equivalent methods of interpreting the information.
Configuration
Channel Order selects the order of channels in the multichannel meter
display. The Surround Format setting (set in the Input & Sources set-
tings panel (p. 61)) constrains which channels are actually dis-
played. If the Surround Format is 5.1, LB and RB are not shown; for 6.1,
LB is replaced by CB and RB is not shown; for 5.1+2, ancillary chan-
nels A1 and A2 replace LB and RB; for 6.1+1, CB replaces LB and
ancillary channel A1 replaces RB.
Peak Hold Time sets the time for which the graphical peak level indica-
tors on the bargraphs display a recent maximum. It does not the affect
the True Peak meter numeric displays. The hold time may be set to 1, 3,
10 or 30 seconds.