Qualcast YT623105X), Инструкция по эксплуатации

Страница: 19 / 25

18
OPERATION
Vacuum
1. Push the product in front of you. The guide rollers (14) make it easy to guide the tube
along the ground (Fig. 15).
Fig. 15
2. The leaves will be sucked up into the tube, shredded and thrown into the collection bag
(12).
3. Make sure the volume of leaves sucked in at one time is not too large. This will avoid
clogging the tube and blocking the impeller wheel.
NOTE: Switch the product off and disconnect it from the power supply if it stops suddenly during
operation and does not produce any suction. Refer to the instructions below about removing
blockages and the “Troubleshooting” section.
Collection Bag
1. Always operate the product with the collection bag (12) attached.
2. Inspect the collection bag (12) each time before use. Do not use it if you detect any
damage.
3. Empty frequently during use. Do not wait until the collection bag (12) is completely full. We
recommend emptying it when it is half full.
NOTE: A full collection bag reduces the performance of this product.
4. Switch the product off and disconnect it from the power supply.
5. Open the collection bag (12) by zipper (12b) and empty clippings onto a compost heap.
6. Close the zipper before continuing operation.
After Use
1. Switch the product off, disconnect it from the power supply and let it cool down.
2. Check, clean and store the product as described below.