Qualcast YT623105X), Инструкция по эксплуатации

Страница: 18 / 25

OPERATION
On/off Switch
1. Move the
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
Blowing
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
something.
OPERATION
On/off Switch
1. Move the
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
Blowing
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
something.
OPERATION
On/off Switch
1. Move the
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
Blowing
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
something.
OPERATION
On/off Switch
1. Move the
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
WARNING! The product will continue to
switched off! Wait until it
Blowing
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
something.
OPERATION
On/off Switch
1. Move the
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
WARNING! The product will continue to
switched off! Wait until it
Blowing
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
something.
OPERATION
On/off Switch
1. Move the
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
WARNING! The product will continue to
switched off! Wait until it
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
something.
OPERATION
On/off Switch
1. Move the on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
WARNING! The product will continue to
switched off! Wait until it
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
On/off Switch
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
WARNING! The product will continue to
switched off! Wait until it
1. Before blowing, loosen leaves that are stuck to the ground using
2. Hold the tube approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
WARNING! The product will continue to
switched off! Wait until it
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
Fig.
WARNING! The product will continue to
switched off! Wait until it
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
Fig.
WARNING! The product will continue to
switched off! Wait until it
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
Fig. 12 Fig. 13
WARNING! The product will continue to
switched off! Wait until it
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
WARNING! The product will continue to
switched off! Wait until it comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
WARNING! The product will continue to
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
WARNING! The product will continue to
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
WARNING! The product will continue to
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
WARNING! The product will continue to
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
sweeping motion from side to side (Fig. 14).
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
WARNING! The product will continue to work for some time
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
14).
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
work for some time
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
14).
Fig. 14
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt
17
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
work for some time
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
Fig. 14
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
work for some time
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
Fig. 14
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
work for some time
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
work for some time
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
work for some time
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
work for some time even after the motor has been
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
4. Ensure that you do not stir up any heavy objects and hurt
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
even after the motor has been
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
somebody or
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
even after the motor has been
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk
somebody or
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
even after the motor has been
comes to a complete stop before putting the product down!
1. Before blowing, loosen leaves that are stuck to the ground using
approximately 10 cm above the ground and walk slowly forward using a
somebody or
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
even after the motor has been
comes to a complete stop before putting the product down!
a broom or rake.
slowly forward using a
somebody or
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
12 Fig. 13
even after the motor has been
comes to a complete stop before putting the product down!
a broom or rake.
slowly forward using a
somebody or
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
even after the motor has been
comes to a complete stop before putting the product down!
a broom or rake.
slowly forward using a
somebody or damage
on/off switch (5) to position “1” to turn the product on (Fig. 12).
2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).
even after the motor has been
comes to a complete stop before putting the product down!
a broom or rake.
slowly forward using a
damage
even after the motor has been
comes to a complete stop before putting the product down!
a broom or rake.
slowly forward using a
damage
even after the motor has been
comes to a complete stop before putting the product down!
a broom or rake.
slowly forward using a
damage
even after the motor has been
comes to a complete stop before putting the product down!
a broom or rake.
slowly forward using a
damage
even after the motor has been
slowly forward using a
even after the motor has been
slowly forward using a slowly forward using a