background image

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

This symbol is known as the Crossed out Wheelie Bin Symbol. When this symbol is marked 

on a product or battery, it means that it should not be disposed of with your general household 

waste.  Some chemicals contained within electrical/electronic products or batteries can be 

harmful to health.

Your high pressure washer is fitted with a moulded plug. However If you need to replace a 

fitted plug then follow the instructions below.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue - Neutral Brown – Live

As the colours of the wires in the mains lead of this appliance may not correspond with the 

coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured blue must be connected to the terminal which is marked with N

The wire which is coloured brown must be connected to the terminal which is marked with

the letter L

If a 13AMP (BS1363/A) plug is used, a 13A fuse must be fitted, or if any other type of plug is 

used a 13AMP fuse must be fitted, either in the plug or adapter, or on the distribution board.

Note:

 If a moulded plug is fitted and has to be removed take great care in disposing of the plug

and severed cable, it must be destroyed to prevent engaging into a socket.If the supply cord is

damaged it must be replaced by a service agent or a similarly qualified person in order to avoid

hazard.

Recycling and Disposal 

Plug Replacement

Recycling and disposal (continued)

Plug Replacement

Содержание Q1W-SP09-1450

























Отзывы: