![background image](http://html1.mh-extra.com/html/qualcast/q1w-sp09-1450/q1w-sp09-1450_original-instruction-manual_3385943016.webp)
Customer Helpline
01904 727500
www.gardenservicecentre.co.uk
WARNING!
In case of contact with detergents: rinse with an abundance of clean water
Always turn off the machine when changing the detergent bottle.
1. Unscrew the bottle cap of the detergent bottle. Fill the detergent to the detergent bottle.
Screw on the bottle cap tight.
2. Fit the detergent bottle to the trigger gun.
3. Turn on the pressure washer. Pull trigger to operate unit. The liquid detergent will
automatically mix with water, and be discharged through the nozzle. Apply detergent to a DRY
work surface, from bottom to top.
3. Rinse with clean water under high pressure (see step 3). On a vertical surface, rinse from
the bottom up, and then rinse from the top down to avoid streaking. Hold nozzle 6-8”
(15-20 cm) from the work surface at a 45
0
angle.
NOTE:
-
Allow detergent to remain on the surface for a short time before rinsing. Do not allow deter-
gent to dry on surface
- When you have finished using the detergent injection system, fill detergent bottle with clean
water. Siphon water at low pressure for one minute, so that all detergent is flushed through
system. Remove detergent bottle, and rinse it until it is thoroughly cleaned.
Step 5 - Use the fix brush
WARNING!
Always turn off the machine when changing the fixed brush.
1. Fit the fixed brush to the lance.
2.Turn on the pressure washer. Pull trigger to operate unit.
Operate the Pressure Washer
Step 4 – Use the detergent bottle