QuadTech Sentry 10 Plus, Инструкция по эксплуатации

Страница: 58 / 85

Page 58 of 85 Operation
To Recall a Test Setup:
With the Sentry Plus instrument in Stand By status:
Press [F3] = MENU.
Press [F3] = SELECT to select MEMORY from the menu parameters list.
Press [F2] = RECALL to select the recall function.
Press [F1] = LAST or [F2] = DOWN to toggle through the test steps.
When the highlighted box is around the test step you want (3. 3 steps),
Press [F3] = SELECT.
The Sentry Plus instrument will prompt: “Recall From 3?”
Press [F1] = YES to recall the test setup or [F2] = NO to select another test setup.
Press [F4] = RETURN to go back to the MENU display.
Press [F4] = EXIT to return the instrument to STAND BY status.
When the Sentry Plus has Key Lock turned ON, the user has the option to lock out recall or
allow for programs to be recalled. If Recall is allowed when Key Lock is ON, then the Recall
function is accessible from the Stand By Menu. This lets the operator recall a memory location
without having to navigate through the menu system.
To Recall with Key Lock ON in STAND BY status:
Press [F2] = RECALL
Press [F1] = LAST or [F2] = DOWN to toggle through test setups.
When the desired test setup is highlighted (backlit):
Press [F3] = SELECT and you will automatically return to STAND BY status.
To DELETE a Test Setup:
With the Sentry Plus instrument in Stand By status:
Press [F3] = MENU.
Press [F3] = SELECT to select MEMORY from the menu parameters list.
Press [F3] = DELETE to select the delete function.
Press [F1] = LAST or [F2] = DOWN to toggle through the test steps.
When the highlighted box is around the test step you want (3. 3 steps),
Press [F3] = SELECT.
The Sentry Plus instrument will prompt: “Delete From 3?”
Press [F1] = YES to delete the test setup or [F2] = NO to select another test setup.
Press [F4] = RETURN to go back to the MENU display.
Press [F4] = EXIT to return the instrument to STAND BY status.
KEY LOCK
RECALL
MORE..
MENU
RMT ERR OFST LOCK STAND BY
0.1A
0.5s
1.2
Ω
F1
F4
F3
F2
LOW GC 1/5 M01 0.3
Ω
:
STAND BY
To change Key Lock Status to OFF
To recall test setup from Memory