Quadro Quadro2x2, Руководство по установке

Страница: 9 / 57

Quadro6L/4L/2x2 Manual I: Installation Guide Hardware Overview
Quadro6L/4L/2x2; (SW Version 5.3.x and higher)
9
5. RJ45 socket to attach the Internet Uplink (WAN) via an Ethernet CAT 5 cable.
This port may also be used to connect IP phones to the Quadro. The default con-
figuration settings assume that IP phones are attached to this, rather than the
LAN port.
6. PHONE sockets with RJ11 connectors enable connectivity of regular analog tel-
ephones. These are FXS (Foreign Exchange Station) analog ports.
Quadro6L/4L/2x2’s Front Panel LEDs
Fig. l- 3: Quadro4L's Front Panel LEDs
1
BUSY, green
Status of CPU
off : No power
on or blinking : Normal activity
2
INFO/FAULT,
yellow/red/green
System information
on (yellow):
device is booting
on (red):
error or system is booting
on (green):
system is operational
blinking (yellow/green):
event occurred, details specified in
the System Event
section of the Man-
agement interface
blinking (red/green):
system unusable
blinking (red/yellow):
emergency firmware is needed
blinking (red/green/red/yellow):
firmware update
3
For Quadro 6L- Green
LED for FXO Lines 1– 6
on or blinking : line in use
off : line not in use
4
For Qudaro4L- Green LED
for FXO Lines 1 – 4
on or blinking: line in use
off : line not in use
5
For Qudaro2x2- Green
LED for FXO Lines 1 – 2
on or blinking: line in use
off : line not in use
6
EXT 1 – Green LED
(available only for Qua-
dro4L and Quadro2x2)
on or blinking: line in use
off : line not in use
7
EXT 2 – Green LED
(available only for Qua-
dro4L and Quadro2x2)
on or blinking: line in use
off : line not in use
LED Indication during a firmware update
A firmware update is indicated by the yellow/red/green Info / Fault LED. It will blink
red/green for about five minutes while the firmware is updated. The Quadro will then re-
boot automatically showing the boot LED sequence.
LED Indication during a boot sequence
A boot sequence is indicated as follows: The yellow/red/green Info / Fault LED will glow red
for a few seconds, then turn to yellow for another four or five minutes while the green Busy