Quadro6L/4L/2x2 Manual I: Installation Guide
Step 2: Configuring the Quadro
Quadro6L/4L/2x2; (SW Version 5.3.x and higher)
26
Step 2.3: Internet Configuration Wizard
Open the
Internet Configuration Wizard
by selecting the corresponding menu item on the
System
menu. The
Internet Configuration Wizard
is a tool for the administrator to confi-
gure the WAN settings and to adjust Quadro's connectivity in the global network. It must be
run if Quadro is desired to be connected to the Internet.
The page
Getting Started
will be displayed:
Fig. l- 25: Internet Configuration Wizard
This first page of the
Internet Configuration Wizard
is for informational purposes only and
lists the items to be configured, Click on the
Next
button for the
Uplink Configuration
pa-
ge
•
Bandwidth
- how much is available upstream and downstream?
.
Before configuring the WAN port to the Internet, you need to get the following information
from your internet service provider:
•
WAN IP Configuration
- is DHCP supported? If yes, no more information is
needed. If DHCP is not supported, the following data is needed: the WAN IP ad-
dress, the subnet mask, the IP address of the standard gateway and the IP ad-
dress of the Domain Name Server (DNS).
•
MAC address
- needed when the ISP requires a specific MAC address for the
WAN.
Additionally, for Point-to-Point Protocol over Ethernet (PPPoE) WAN interface, you need to
get the following information from your internet service provider:
•
PPP Configuration
- does your ISP use a dynamic or fixed WAN IP address? If
the WAN IP address is dynamic, no more information is needed. If the WAN IP
address is fixed, you will have to enter it.
•
Authentication
- does your ISP require authentication? If authentication is re-
quired, information about the corresponding method (PAP, CHAP or MSCHAP) is
needed including the username and password of the PPPoE account.
This information will be needed to be inserted in the Internet Configuration Wizard.
Содержание Quadro2x2
Страница 1: ......
