Step 8A
FIG 35
FIG 36
FIG 37
FIG 38
Installing the Quarter and Rear Windows to the Top Deck
To ensure the top is centered on the vehicle you will be installing the two quarter windows and the rear window to the
top deck and to each other before securing it to the vehicle body.
Pro-Install TIP:
To make this as easy as possible, you may have to release the front windshield header (release but not
Step 8B
Installing the Rear Window to the Top Deck
Locate the rear window and line up and slide the rear window into the “C” Channel located at the top of the rear portion
of the top deck (FIGs 41, 42 & 43). Once both quarter windows are secured to the top deck, line up the driver’s side rear
zipper on the quarter window and on the rear window and zip it down a few inches (FIG 44). Repeat this on the pas-
senger side of the rear window.You may have to lift the quarter window up to secure this second zipper. Once both side
zippers are secure, zip the rear window zippers down about half way (FIG 45). You will close these zippers completely
at the end of step
9
.
FIG 41
FIG 45
FIG 44
FIG 43
FIG 42
FIG 39
FIG 40
un-hook) and loosen the rear corner straps installed in step 4.This will allow you to line up all window zippers and
at-
tachments. The rear corner straps and header will need to
be re-tightened/clamped before using the top
. Locate the
drivers rear quarter window. Line up the driver’s side Quarter window to the zipper on the deck and zip it as shown in
FIG’s 37,38,39 & 40 Repeat this on the passenger side of the vehicle.
