6
12 Volt Power Adapter Harness Installation: for '11-'18 JK
On top of the dash lift up the rubber
tray insert and remove the screw using
a 7mm socket. (FIG13).
Tilt the panel away enough to access
the 12v socket connection. Squeeze the
black tap and disconnect it. (FIG 15)
Connect the white connector to the
original plug you just disconnected in
FIG 15. Connect the gray connector
back into the 12v socket. (FIG 16)
FIG15
FIG16
FIG13
FIG14
FIG13A
Next, lift the large dash top panel off
carefully set aside (as highlighted in
FIG 13A).
Gently pull out on the climate control
center to release the clips. (FIG 14)
