5
Under the steering column remove the
center panel by pulling it away from the
dash releasing the clips. (FIG8)
Remove the two screws using a 7mm
socket. (FIG9)
Using a trim clip removal tool gently
remove the window control switch or
dash pocket if switches aren’t present.
(FIG 10).
On the window control switch
slide the red locking tab over, squeeze
the black tab and disconnect the
harness. (FIG 11)
Remove the center screw using a 7mm
socket. (FIG 12)
FIG8
FIG9
FIG10
FIG12
FIG11
12 Volt Power Adapter Harness Installation: for '11-'18 JK
