The Trusted Source
®
6
For Wired Operation:
Unscrew the remote
plug cap. Plug the 12’ long remote cord
into the handheld remote controller.
Make sure that you align the cord with
the three indexing notches in the remote
handle. Thread the securing collar onto
the remote handle to ensure a proper
connection.
Next, loosen the Rubber Plug Cover on
the right hand side of the winch. Plug the
“D” shaped end of the Remote Cord into
the corresponding receptacle on the right
hand side of the winch. Be sure that the
plug is fully engaged onto the winch as
shown.
Your winch will automatically power up
and be fully functional once the controller
is connected to the winch. The amber
LED Winch Drum light will illuminate
along with the blue “wired” indicator
light on the remote. There is NO need to
activate the power button on either the
winch or the controller when using
“wired” mode. Test both the OUT and IN
functions of the winch using the red
rocker switch on the remote with a short
press of the switch. The winch will stay
on as long as the remote is plugged in.
The winch will automatically shut off as
soon as the cord is unplugged.
For Wireless Operation:
First, loosen the
rubber Power Button Cover on the left
hand side of the winch to expose the
power button. Press the power button
once. The power button will illuminate
along with the amber winch drum lights.
Now press the Remote Control power
button once. The red “WIRELESS” light
will illuminate on the controller. This red
Remote Controller Setup
Remote
Handle
Plug cap
Securing Collar
Cord
Rubber remote
plug cover
“D” Shaped
Remote
Plug End
Blue “Wired”
Indicator Light
Red
Rocker
Switch
Rubber Power
Button Cover
Winch Power
Button
WIRED
MODE
WIRELESS
MODE
Q_STEALTH_INSTALL_SYN_A4.qxp_QUADRATEC WINCH USER GUIDE 8/3/18 11:32 AM Page 6
