Quadratec 92122.203 series, Сборка и инструкция по установке, Страница: 2 / 12

Solenoid Assembly
Tie
Bar
Controller
The Trusted Source
®
2
Unpacking:
When unpacking, check to make sure all parts are included. If any part is missing or
broken, please call Quadratec Customer Service at 800-745-6037 as soon as possible.
Note About Photos in this Installation Guide:
Some of the graphics in this manual may not exactly match your winch model.
All information and instructions given applies to all models except where noted.
A Few Words About Product Safety:
Your safety and the safety of others is
very important. To help you avoid risks
and make informed decisions this man-
ual contains safety messages about your
Q-Series self-recovery winch. Individual
safety messages and sections of this
manual may be preceded by the safety
alert symbol ! [in triangle] and one of
three signal words:
a hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you do not
follow instructions.
a hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you do not follow instructions.
Careful attention is required to this instruction or operation but does
not generally relate to personal injury. Damage to your Quadratec
®
product or other property may result if you do not follow instructions.
Clutch Control
Synthetic
Winch Line
with Chafe
Guard
Hawse
Fairlead
Winch Hook Strap
Mounting
Hardware
Winch
Hook
Fairlead
Hardware
QSERIES_92112_203X_INSTALL_Layout 1 9/25/12 11:23 AM Page 2
09252012112527