The Trusted Source
®
3
Pet Barrier Assembly & Installation:
Using the wingnuts, adjust the vertical
bars to the appropriate height to fit in
the back of your Jeep.
Make sure the main frame bar footpads
are firmly against the roof/rollbar and
floor and are parallel to each other.
Adjust the position of barrier bars
evenly that best fits your application.
The 6 Phillips screws can be tightened
at this time.
Extend the horizontal barrier bars
according to the width of the interior
of your vehicle.
Your install should be complete.
Q_PET_BARRIER_92035_1000_Layout 1 11/19/14 3:47 PM Page 3
11192014154741
