The Trusted Source
®
3
Installation Step One:
Installing Front Tubular Bumper
Your Front Tube Bumper has special
installation tabs that allow it to fit multi-
ple model year vehicles. Depending on
which model you own will determine
which hole or slot the bumper is to be
installed in (Fig 3).
Figure 1
Figure 4
For ’87-’95 Wranglers equipped with factory front tow hooks, these will
need to removed and discarded. These tow hooks are not compatible
with Tubular Bumpers. Original equipment hardware must be replaced
with (2)
1
⁄
2
”- 13 x 1 -
1
⁄
2
” Grade 8 bumper bolts & washers for proper
installation of bumper. These bolts & washers are included in this kit.
Figure 3: Carefully align the multiple mounting
holes in the bumper with the frame mount holes
to ensure proper fitment.
Installation Step Two:
Carefully line up the proper holes on the
mounting tabs with the front holes of the
frame and locate on the bumper mount-
ing tabs the proper holes to install your
bumper. The bumper should be centered
on the front of the vehicle and as close to
the frame horns as possible (Fig 4).
Figure 2
QR3_Front_Tubular_LTR.qxp_Layout 1 5/16/16 4:00 PM Page 3
05162016160216
