The Trusted Source
®
2
Before You Begin Installation:
Congratulations on your purchase of
Quadratec Front Tube Bumper for your
Jeep
®
CJ-7 and Wrangler. This custom
fit front Bumper has been designed for
long life and a great look. Though con-
structed of only the finest materials, this
Tube Bumper must be maintained to
keep its look while performing under the
toughest conditions. Please see page 4
for important care and maintenance tips
to keep your bumper looking like new.
Thank you again for your purchase and
let’s start the installation process.
When unpacking, check to make sure all
parts are included and not damaged due
to shipping. If any part is missing or
broken, please call Quadratec
Customer Service at 800-745-6037
as soon as possible.
A Few Words About Product Safety:
Your Front Tube Bumper is intended to
enhance the utility and enjoyment of
your off road capable vehicle. Before
installation, please take a moment to
review the following safety information
and installation instructions. Important
safety information is generally preceded
by one of three signal words indicating
the relative risk of injury.
The signal words mean:
Step One: Removing Existing Bumper
Put on safety glasses. Locate the four or
six (depending on vehicle model year)
factory bolts holding your existing
bumper to the frame of your Jeep
®
(Fig 1).
See next page.
Using the proper tool/wrench, remove the
two or four top bolts holding the bumper
to the frame and place them in a safe
place. These bolts along with the sup-
plied washers will be used to re-install
your tube bumper to your Jeep
®
(Fig 2).
As you unpack your front bumper, be careful not to scratch the finish
with a knife or razor. We suggest placing the unpacked bumper back
into the original box so it does not get scratched before the installa-
tion begins. If you’ve purchase a Front Winch Mount Tubular Bumper,
a separate Winch Mounting Plate is require for installation. If you do
not have this winch plate, go to quadratec.com and type in the key
word “winch mounting plate”. The instructions below call out in step
number two when this winch plate would be installed.
a hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you don’t
follow instructions.
a hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don’t follow instructions.
Careful attention is required to this instruction or operation but does
generally not relate to personal injury. Damage to your Quadratec
®
product or other property may result if you don’t follow instructions.
QR3_Front_Tubular_LTR.qxp_Layout 1 5/16/16 4:00 PM Page 2
05162016160215