background image

The Trusted Source

®

12

Quadratec

® 

Exclusive

Three Year Limited Warranty

Your Quadratec

®

branded accessories are

covered by the following 

Limited Warranty

provided exclusively by Quadratec, Inc., 1028
Saunders Lane, West Chester PA 19380.

This 

Limited Warranty

is the only warranty

made in connection with your purchase.
Quadratec neither assumes nor authorizes any
vendor, retailer or other person or entity to as-
sume for it any other obligation or liability in
connection with this product or 

Limited War-

ranty

. This 

Limited Warranty

does not apply

and is not cumulative to any accessory or part
distributed by Quadratec for which the Manu-
facturer provides a separate written warranty. 

What is Covered: 

Subject to the terms, exclu-

sions and limitations herein and with respect
only to Quadratec branded accessories first sold
in the United States, Quadratec warrants to the
initial retail purchaser only that your
Quadratec accessory shall be free of defects in
material and workmanship: 

for a period of

three (3) years from date of retail purchase.

This 

Limited Warranty

is not assignable and

shall terminate upon sale of the vehicle upon
which the Quadratec accessory is installed or
other transfer third persons.

All other warranties are hereby disclaimed, ex-
cept to the extent prohibited by applicable law
in which case any implied warranty of mer-
chantability or fitness for a particular purpose
on this product is limited to 3 year from date of
initial retail sale. Quadratec reserves the rights
to: (a.) require invoice or other proof your ac-
cessory is within the terms of this 

Limited

Warranty

as a condition of warranty service

and, (b.) make future revisions to this product
and 

Limited Warranty

without prior notice or

obligation to upgrade your product.

What is Not Covered:

Your Quadratec 

Limited Warranty

does not

cover products or parts Quadratec determines
to have been damaged by or subjected to:

(a.) installation damage, alteration, modifica-
tion, combination with other parts, failure to
maintain or improper repair or service, (b.) nor-
mal wear & tear, cosmetic damage or damage
from moisture or water immersion, (c.) Acts of
God, accidents, misuse, negligence, inadequate
mounting or impact with vehicle(s), obstacles
or other aspects of the environment, (d.) theft,
vandalism or other intentional damage.

Remedy Limited to Repair/Replacement:
The exclusive remedy provided hereunder shall,
upon Quadratec inspection and at     Quadratec’s
option, be either repair or replacement of prod-
uct or parts (new or refurbished) covered under
this Limited Warranty.

Customers requesting

warranty consideration should first contact
Quadratec to obtain a RGA number
(610-701-3336). All labor, removal, shipping
and installation costs are customer’s 
responsibility.

Other Limitations - Exclusion of Damages -
Your Rights Under State Law:

In consideration of the purchase price paid, nei-
ther Quadratec nor any independent Quadratec 
distributor/licensee are responsible for any time
loss, rental costs, or for any incidental, conse-
quential, punitive or other damages you may
have or incur in connection with any part or
product purchased. Your exclusive remedy
hereunder for covered parts is repair/replace-
ment as described above.

This 

Limited Warranty

gives you specific rights.

You may also have other rights that vary from
state to state. For example, some states do not
allow limitations of how long an implied war-
ranty lasts and /or do not allow the exclusion
or limitation of incidental or consequential
damages, so the limitations and exclusions
herein may not apply to you.

©Quadratec, Inc. 2019. All Rights Reserved.
A4 Version 11.12.19

Instructions Part 

#

12999.3153

Q_JK_ALUM_FBMPR_12057_9261_A4.qxp_A4  11/12/19  11:50 AM  Page 12

Содержание 12057.0263













Отзывы: