Install the canister brackets to the
winch mount as shown with M6 wash-
ers and lock nuts using a 10mm socket.
(FIG 13) This is shown upside down for
illustration purposes.
Loosely install the left and right nut
plates to the inside of frame rails with
the M10 x 20 Bolts and fender washers
using a 17mm socket. (FIGs 14 A&B)
On 2012 and newer models locate and
remove the mounting hardware for the
brake vacuum canister using 10mm
socket or wrench. (FIG 9)
Slide down the green tab and slide off
the large hose. (FIG 10)
The Trusted Source
®
6
JK Front Bumper Installation Preparation:
Pull of the small breather hose by
pulling downward. (FIG 11)
Carefully set canister out of the way.
(FIG 12)
FIG9
FIG10
FIG11
FIG12
FIG13
FIG14A
FIG14B
Q_JK_ALUM_FBMPR_12057_9261_A4.qxp_A4 11/12/19 11:50 AM Page 6
