quadral AURUM M10, Инструкция пользователя, Страница: 7 / 11

ENGLISH
13 12
• Never use the equipment in the vicinity of water, in humid areas or outdoors. Moisture can
bypass the electrical insulation and this will create a life-threatening risk as is the case with all
equipment that has not been specially designed against the penetration of moisture.
• Protect the equipment against water being sprayed on it. You must also ensure that no vessels
containing liquid (e.g. vases) are placed on top of the equipment.
• Do not place the equipment in the vicinity of a heat source such as an electric fire, radiator,
oven or similar.
• The slits and openings in the enclosure provide the ventilation and ensure reliable operation.
They must never be misaligned or covered.
• Burning-out of specific components cannot be completely excluded, despite the use of pro-
tective devices, if the equipment is severely overloaded by continually using very loud sound
levels. A fire might also be caused inside the equipment in theory, as a result of this type of
overloading. Therefore the amplifier should always be used within its limits and it should not
be left unattended.
• Only our technical service should undertake the maintenance of your equipment. Maintenance
will be necessary if any type of damage occurs, i.e. if the power cables or plugs are damaged,
if an object falls on the equipment, if the equipment is dropped or if liquid seeps into it. Never
open the equipment as you might touch the mains voltage (230V / 115V), which is dangerous.
• Only use furniture and other units for attaching and putting the equipment on that can be
obtained from or are recommended by the manufacturer. You must ensure that moveable tab-
letop units or shelves on which the equipment will be placed are always moved very carefully
in order to prevent damage or injuries from being caused if the equipment tips over.
• Continuously loud volume can damage your hearing!
• Only use a dry, soft cloth to clean your equipment.
• Keep the packing for possible transportation use later on and keep the plastic bag well away
from children, due to the risk of asphyxiation.
Control elements on the M10 front panel
1 Speakers: Button for speaker switching (Sequence: Group A / B / A+B / OFF)
2 LED: Loudspeaker group display
3 Operating Display: This display will light up blue, when the device is turned on and in
operation
4 On/Off Button: Press this button to turn the M10 on. Press this button again to switch the
device off (standby). During standby operation, all of the settings remain saved.
5 Standby Display: This display is blue whenever the unit is in standby mode and this indicates
that the unit can be switched on again at any time using either the remote control or button
(4) .
Note:
If this display will flash the protection circuit turn off speaker in case of failure or overload.
Reset will be possible if you operate power switch (9) located at back panel again.
1 4 3 2 5
M10