Included is a harness
(#M43800)
that routes from the tank assembly to
the rocker control switch. The red
wire is the 12V power, this goes from
the power stud on the tank assembly
(on copper strip with 5/16” studs
from solenoids) to the center post on
the switch. The black wire is ground &
is not needed for this switch. The
grey wire goes from the retract
operation post on the retract
solenoid to the post labeled “1” on
the switch. The blue wire goes from
the extend post on the extend
solenoid to the post labeled “3” on
the switch. The switch is not
waterproof & must be installed inside
the coach.
Typical Plumbing
F
or 2
Poin
t “Slave” S
ystems
(one pump, two jacks)
Rocker
Switch
Controls
