Quadra-Fire • QFP44 • 4051-300 • Rev. U • 4/11
23
5
5
Framing and Clearances
A. Select Appliance Location
When selecting a location for the appliance it is important
to consider the required clearances to walls (see Figure
5.1).
WARNING! Risk of Fire or Burns!
Provide adequate
clearance around air openings and for service access. Due
to high temperatures, the appliance should be located out
of traffi c and away from furniture and draperies.
NOTICE:
Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
52 in.
(1321 mm)
1.5 in. (114 mm)
1.5 in.
(114 mm)
31 in.
(787 mm)
69-3/4 in.
(1772 mm)
69-3/4 in.
(1772 mm)
1.5 in.
(114 mm)
1.5 in.
(114 mm)
1.5 in.
(114 mm)
Top Vent
One 90° elbow
Horiz Term
In addition to these framing dimensions, also
reference the following sections:
• Clearances and Mantel Projections
(Sections 3.C. and 3.D.)
• Vent Clearances and Framing
(Section
6)
52 in.
(1321 mm)
98-5/8 in.
(2505 mm)
12 in.
(305 mm)
Figure 5.1
Appliance Locations
