Quadra-Fire • LOGS-QFI30 Log Instructions • 2221-935 Rev. E • 6/18
2
Log #4 (SRV2221-706)
: Position Log #4 as shown in Figure 9. See Figure 2 and Figure 10 for additional references. Mate
the grate tine slot with the base of the right grate tine. The grate tine slot is located on the bottom right end of Log #4. See
Figure 10. Slide the right end of the log forward until the tine fully engages the slot. Mate the log pin slot with the right log pin.
Figure 8. Log #3 - Bottom View
Figure 9. Place Log #4
MATE LOG PIN
WITH LOG SLOT
Figure 11. Place Log #5
4
Figure 6. Log #2
Log #3 (SRV2221-702)
: Position Log #3 as shown in Figure 7. See Figure 2 and Figure 8 for additional reference points.
Mate the base of the left grate tine with the groove located on the bottom of the log. Pull the log forward until it stops against
the vertical portion of the grate tine. Swing the rear of the log counterclockwise until it touches the firebox.
FRONT
Figure 7. Place Log #3
RECESSED AREA
2
BACK
FLAT SPOT
FOR LOG #5
LOG TOUCHES
FIREBOX
3
3
BASE OF GRATE TINE FITS IN GROOVE
BASE TINE
MATE GRATE TINE
WITH LOG SLOT
4
Figure 10. Log #4 - Bottom View
GRATE TINE SLOT
LOG PIN SLOT
FRONT
BACK
FLAT SPOT FOR LOG #6
LOG GROOVE FOR LOG #7
5
Log #5 (SRV2221-704)
: Position Log #5 as shown in Figure 11. See Figure 2 and Figure 12 for additional references.
Rest the left end of Log #5 on the flat spot indicated in Figure 7. Locate right end of log against the grate and to the left of
the log pin. Ensure the nose of the log does not cover any burner ports.
RIGHT
LEFT
