Quaddrix QT-500 Series Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 128

Quaddrix QT-500 Series Скачать руководство пользователя страница 36

difference for actual play speed.

Exit playback

In playback interface, press [ESC] key to enter into preview mode.
In playback interface, press [MENU] key to enter into main menu, press
[REC] key to enter into manual record, and press [PTZ] key to enter into
PTZ control mode.

4.7 Backup Recorded Files

Note: The user must have “Playback” right. Please connect with
backup devices before you start to backup.

In the playback interface, you can backup the recorded files.
In the preview mode, press [PLAY] key, in the login dialog, select
username and input the correct password, you can enter into the playback
interface.
In the menu mode, just press [PLAY] key, you can enter into playback
interface directly.

Backup intraday recorded files

In the playback interface, move “Active Frame” to “

Backup Today

”

button, press [ENTER] key, all intraday recorded files of all channels will
be backup to the save device. A pop-up dialog will display the backup
status.
If backup device is not connected correctly or DVR do not detect the
backup device, the following dialog will be pop-up. Please ask
administrator for more information.

«
...
34
35
36
37
38
...
»

Содержание QT-500 Series

































































































































Отзывы:

Нет отзывов