154.033UK User Manual
Power Connection
The PAR12 is hard-wired to a split IEC lead
with a male and a female IEC connector.
Connect the supplied IEC mains lead from
the male IEC to a suitable outlet and connect
the female IEC on to power further PAR12
fixtures or other equipment.
Rear Panel
Internal Settings
Using the menu buttons (5) the PAR12 can be set to run in various modes.
These are outlined in the table below.
Function
Display Press Up/Down
Press Enter + Up/Down
DMX address setting
.
.
-
.
DMX start address
Slave mode (IP mode)
.
.
-
.
Auto 1 static colours
.
.
-
.
Colours setting
Auto 2 colour change
.
-
.
Speed setting
Auto 3 fade programs
.
.
-
.
Colours setting
.
-
.
(flashing)
Speed setting
Auto 4 sound-activated
.
.
-
.
Sequence setting
.
-
.
(flashing)
Mic. sensitivity
Auto 5 strobe programs
.
.
-
.
Colours setting
.
-
.
(flashing)
Speed setting
Red custom level
.
.
-
.
Static Red level 0-100%
Green custom level
.
.
-
.
Static Green level 0-100%
Blue custom level
.
.
-
.
Static Blue level 0-100%
White custom level
.
.
-
.
Static White level 0-100%
1
DMX input XLR
2
LED display
3
Power cable
4
DMX output XLR
5
Menu buttons
