Qtx 154.030UK, Руководство пользователя

Страница: 6 / 9

154.030UK User Manual
DMX addressing
To enable a DMX controller to communicate correctly, the cans must be set to the
required start addresses.
•
Press MENU repeatedly until the display shows

(refer to appendix 1) followed
by ENTER.
•
The display will show a number from  to  .
•
Using the UP or DOWN buttons select the required starting address followed by
ENTER.
•
The display will revert to  .
•
Press and hold MENU for 5 seconds to save the setting.
Other main menu items

The 7-segment LED display can be programmed to turn off while the fixture is in
use.
•
Press MENU repeatedly until the display shows  (refer to appendix 1) followed
by ENTER.
•
The display will flash
   or  .
•
Using the UP or DOWN buttons select the required option followed by ENTER.
•
The display will revert to
 .
•
Press and hold MENU for 5 seconds to save the setting.
•
In use, the display will now turn off after one minute of inactivity.