USER MANUAL
13
CONTROL & FUNCTION
z
Regular breaks during operation are essential to maximize the life of this
device as it is not designed for continual use.
z
Do not switch the unit on and off in short time intervals
z
Always unplug the unit when it is not used for a longer time. Or before
replacing the bulb or start servicing.
z
In the event of serious operation problems, stop using the fixture and
contact your dealer immediately.
Operating Mode
When laser is powered on, LED monitor on rear panel shows the current
operating standalone mode or DMX address of DMX mode. With help of LED
control panel, it is very easy to set and change the operating mode of laser. After
NO.
NAME
DESCRIPTION
5
Main Power Input
DC12V-1A Power Supplier
6
Power Switch
Switch ON and OFF the fixture
7
Safety Eye
Used to attach a safety cable when the fixture is
rigged. Check more details in RIGGING
8
Mic Sensitivity
Knob
Turn the knob (potentiometer) until the laser
works in sync with the music.
9
Microphone
To detect the music/sound signal
10
Knob 2
Motor 2 Speed adjustor
11
Knob 1
Motor 1 Speed adjustor
12
Control panel
To control the fixture with digital LED display,
check more information on CONTROL &
FUNCTION
13
Cooling Fan
Used to cool the components inside the
enclosure. Never cover this fan outlet!
14
LINK IN/OUT
For linking Master and Slave fixture
15
Key Switch
Safety key switch for laser
ATTENTION
: Laser will be output from laser aperture in 5 seconds
after the unit is powered on.
