USER MANUAL
14
every resetting and saved, the new mode information will be shown on LED
monitor at next power on.
Mode/Function Option, to choose the operating mode of laser.
Confirmation, to confirm all setting or change of LED control panel.
UP/DOWN, to change operating mode, parameter or DMX address.
Operation
Power ON laser
When the fixture is powered and switched ON,
V10
will be shown on LED display
panel. V10 stands for the technical program version of this fixture. It is Version 1.0
now. After 3 seconds, the fixture goes to the MODE which was confirmed and
saved before last turn OFF.
AUTO SHOW Stand Alone Mode
z
Press FUNC to enter MODE OPTION.
z
Till to LED panel shows
A 1,
A
stands for Auto,
1
stands for the rotating
speed of burst patterns effect.
1
to
4
is clockwise rotating,
5
is not
rotating,
6
to
9
is anticlockwise rotating.
z
Press UP/DOWN to select your favorite rotating effect.
z
Press ENTER to confirm the setting.
The laser is working in standalone mode
–
AUTO SHOW. Each time when you
turn on your laser, you will have this confirmed laser show.
