QTX Light 151.269, Руководство пользователя

Страница: 8 / 12

User Manual 151.269 / 151.272
8
PART II Installation and Operation (continued)
A. DMX mode:
To have the fixture working in DMX mode, please toggle on the dipswitch #1 of Group1 as
illustrates in below figure:
1.DMX channels 1,2,3,5 functions are determined by the settings of channel 4.
For example, while channel 4 is set between 0 and 28,
Channel 1 will control the Red LEDs,
Channel 2 will control the Green LEDs,
Channel 3 will control the Blue LEDs.
While channel 4 is set between 29 and 255
Channel 5 will control the speed of the Auto program.
2. channel 6 is not determined by channel 4.
Channel Value Function CH1 CH2 CH3 CH5
000~028 RGB Control Mode
Red
000 → 255
Green
000 → 255
Blue
000 → 255
No Function
000 → 255
029~056 Program 1
057~084 Program 2
085~112 Program 3
113~140 Program 4
141~168 Program 5
169~196 Program 6
197~224 Program 7
4
225~255 Program 8
No
Function
No
Function
No
Function
Adjusts the auto
program speed
( the fastest 0.4s,
the slowest 2.5s)
0~10 No Strobe CH6
11~255 Higher the value quicker the Strobe rate
B. M/S mode
To work in M/S mode, you should designate one fixture as master mode and the rest as
slave mode. By switching the dipswitch #1of Group 2 off, you set this fixture to master
mode. By switching the dipswitch #1 of Group 2 on, you set this fixture to slave mode as
the way you set it to DMX mode.