QTS QTS-CLX-PVX Скачать руководство пользователя страница 21

Страница: 21 / 46

QTS-CLX-PVX Page

The

QTS-CLX-PVX Module Properties

dialog appears.

Enter the

Module Name

. It can be up to 15 characters long. It should follow the rules for

naming ControlLogix aliases; it should contain only alphanumeric characters and the
underscore. Click OK to accept the name.

The name is displayed on the 4-character display and is used by ClxPvxCfg to build
aliases for ControlLogix data.

The default name assigned when you perform an autoconfiguration is Auto_Scan.

The name should be unique so that if you have more than one QTS-CLX-PVX module,
the alias names associated with each module are unique.

TIP

Use the same name that you assign the module in RSLogix 5000 to make
it easy to associate aliases with the module.

You can use the name of the controller you are monitoring, for example,
SRx101.

Setting the Module Mode

To switch between modes or to update module firmware, select

Actions/Change Module

Mode…

Changing the module mode downloads firmware to the card.

If the RSLinx path has not been set, select the module in the tree.

The Set QTS-CLX-PVX Mode dialog appears.

It shows the current mode and lets you select the firmware to download.

IMPORTANT!

If you change the mode (monitor to master or master to monitor), any
configuration on the module is cleared. If the firmware you download is
the same as the firmware already on the module (for example, if you are

Содержание QTS-CLX-PVX















































Результаты поиска

Содержание QTS-CLX-PVX

Отзывы:

Бренды по названию

Популярные бренды

QTS QTS-CLX-PVX, Руководство пользователя

Результаты поиска

Содержание QTS-CLX-PVX

Отзывы:

Бренды по названию

Популярные бренды