QTS AN-X2-MOD-MAS Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 66

background image

Page

66

AN-X2-MOD-MAS

May 2016

Warranty

Quest Technical Solutions warrants its products to be free from defects in workmanship
or material under normal use and service for three years after date of shipment. Quest
Technical Solutions will repair or replace without charge any equipment found to be
defective during the warranty period. Final determination of the nature and responsibility
for defective or damaged equipment will be made by Quest Technical Solutions
personnel.

All warranties hereunder are contingent upon proper use in the application for which the
product was intended and do not cover products which have been modified or repaired
without Quest Technical Solutions approval or which have been subjected to accident,
improper maintenance, installation or application, or on which original identification
marks have been removed or altered. This Limited Warranty also will not apply to
interconnecting cables or wires, consumables nor to any damage resulting from battery
leakage.

In all cases Quest Technical Solutions’ responsibility and liability under this warranty
shall be limited to the cost of the equipment. The purchaser must obtain shipping
instructions for the prepaid return of any item under this Warranty provision and
compliance with such instruction shall be a condition of this warranty.

Except for the express warranty stated above Quest Technical Solutions disclaims all
warranties with regard to the products sold hereunder including all implied warranties of
merchantability and fitness and the express warranties stated herein are in lieu of all
obligations or liabilities on the part of Quest Technical Solutions for damages including,
but not limited to, consequential damages arising out of/or in connection with the use or
performance of the Product.

«
...
64
65
66

Содержание AN-X2-MOD-MAS



































































Отзывы:

Нет отзывов

Похожие инструкции для AN-X2-MOD-MAS

Бренд: Uniden Страницы: 35

Бренд: R&S Страницы: 52

Бренд: ADS Страницы: 24

Бренд: Custom Audio Electronics Страницы: 52

Бренд: Nikon Страницы: 160

Бренд: Plustek Страницы: 24

SmartOffice PS286 Plus

Бренд: Plustek Страницы: 220

Бренд: Radio Shack Страницы: 62

Бренд: Xerox Страницы: 65

Бренд: IRISCard Страницы: 25

Бренд: Uniden Страницы: 35

Бренд: Uniden Страницы: 28

Бренд: XAC Страницы: 5

Бренд: IPS Страницы: 12

MultiScanner L550c OneStep

Бренд: Zircon Страницы: 2

Бренд: NCR Страницы: 5

Бренд: Renaissance Learning Страницы: 4

Бренд: Nisca Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды