QTS AN-X2-MOD-MAS Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 66

background image

Page

42

AN-X2-MOD-MAS

May 2016

The address is AnxMod:0:O.Data[0]. The address is made up of the ClxName and the
data location. The default ClxName assigned by autoconfiguration is the hostname.

Using the ControlLogix Log

If there are problems with scheduled connections to the AN-X, use the ControlLogix log
to identify the cause.

From the web interface, select

Log Files/ControlLogix Log

to display the log. Look for

error messages that describe in detail the cause of any problem with the current
configuration.

Redundancy

The AN-X2-MOD-MAS includes features to make it easy to enable and disable AN-X
I/O scanners. It can be used to implement redundant I/O scanners, redundant controllers,
etc.

One ControlLogix and AN-X is designated the primary and acts as the scanner; the other
is designated the secondary and acts as a backup.

If the primary ControlLogix decides there is a problem, it takes its AN-X offline and the
backup takes over.

The backup AN-X constantly monitors the S908 network. When it becomes the primary,
it has the current state of inputs, drop status, etc. Each ControlLogix processor has access
to current I/O data from the S908 network.

The backup AN-X listens to the S908 network when it is told to go online as a scanner. It
waits for 10 ms of silence on the network before it takes over. It does not start scanning
if it hears another master already online.

There have been changes and additions to the ControlLogix configuration file to support
redundancy. No changes are required to the S908 I/O Configuration file.

The firmware is backwards compatible. Existing applications do not need to be modified.

The AN-X distribution CD and website have technical notes that describe in detail the
procedure for using redundant AN-X modules.

ControlLogix Ethernet Configuration File

The ControlLogix configuration file has the following elements to support redundancy.

Parameter

Description

RedundEna, RedundPrefix

Must be included at the beginning of the ControlLogix
configuration file

RedundPrefix is used to create aliases for data

«
...
40
41
42
43
44
...
»

Содержание AN-X2-MOD-MAS



































































Отзывы:

Нет отзывов

Похожие инструкции для AN-X2-MOD-MAS

Бренд: Velopex Страницы: 25

Бренд: CipherLab Страницы: 283

Бренд: 4DDynamics Страницы: 2

2450 - Perfection Photo Scanner

Бренд: Epson Страницы: 58

15000 - GT - Flatbed Scanner

Бренд: Epson Страницы: 80

Бренд: Epson Страницы: 9

2400 - Perfection Photo - Dpi x

Бренд: Epson Страницы: 8

00000650 - Perfection 3200 PRO Color Scanner

Бренд: Epson Страницы: 34

1640SU - Perfection Photo Scanner

Бренд: Epson Страницы: 2

1660 - Perfection Photo

Бренд: Epson Страницы: 2

00000650 - Perfection 3200 PRO Color Scanner

Бренд: Epson Страницы: 4

1640SU - Perfection Photo Scanner

Бренд: Epson Страницы: 192

2400 - Perfection Photo - Dpi x

Бренд: Epson Страницы: 2

Бренд: I.R.I.S. Страницы: 4

Бренд: FujiFilm Страницы: 173

Бренд: Reinecker Страницы: 28

Бренд: MAC TOOLS Страницы: 119

Бренд: HandHeld Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды