QTECH
Software Configuration Manual
14-183
Use queue-scheduler cos-map command to configure 4 cos-map relationship of hardware priority queue and
8 priority of IEEE802.1p protocol
Use following command in global configuration moide.
queue-scheduler cos-map
[
queue-number
] [
packed-priority
]
Use following command to display the priority cos-map.
show queue-scheduler cos-map
For example :
! Configure packed-priority 1 to mapped priority 6 of IEEE 802.1p
QTECH(config)#queue-scheduler cos-map 1 6
14.2.6
Flow mirror configuration
Flow mirror is copying the service flow which matches ACL rules to specified monitor interface to analyse
and monitor packet.
Use following command to configure flow mirror.
Configure it in interface configuration mode.
Flow mirror configuration
mirrored-to
{ [
ip-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ] [
link-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ] } } [
interface
interface-num
]
Cancel flow mirror configuration
no mirrored-to
{ [
ip-group
{ access-list-number | access-list-name } [
subitem
subitem ] ]
[
link-group
{ access-list-number | access-list-name } [
subitem
subitem ] ] } }
Details of this command refers to corresponded command.
14.2.7
Flow statistic configuration
Flow statistic configuration is used to statistic specified service flow packet.
Use following command to configure it.
Configure it in global configuration mode.
Flow statistic configuration
traffic-statistic
{ [
ip-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ]
[
link-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ] } }
Clear statistic information
clear traffic-statistic
{
all
| [
ip-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ]
[
link-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ] } }
Cancel flow statistic configuration
no traffic-statistic
{
[
ip-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ]
[
link-group
{
access-list-number
|
access-list-name
} [
subitem
subitem
] ] } }
If reconfiguring flow statistics, the corresponded information will be cleared.
Details of this command refers to corresponded command.
14.3 Monitor and maintenance of QoS
Configure it in corresponded configuration mode. Show command can be used in any configured mode
except user mode.
Display all QoS information :
show qos-info all
Display all QoS statistic information
