QTech QSR-2830, Руководство пользователя

Страница: 13 / 28

Руководство пользователя
1. Configuring WAN-4G 13
www.qtech.ru
1.2.4
Associating 4G Interface with Interface Protocol Status
1.2.4.1 Configuration steps
Step Configuration Task Description
1 Associated Master Interface Protocol Status
(BFD or TRACK) Optional
1.2.4.2
Configuring Association with Master Interface Protocol Status
Command Description
Qtech# configure terminal Enters the global configuration mode.
Qtech(config)# interface cellular 0/0 Enters the interface configuration mode.
Qtech(config-if-Cellular 1)# apply detect interface vlan 10
{bfd | track track_id} Configures the protocol status association between the
4G link and primary link: BFD or TRACK.
Example: Configure association with the BFD protocol.
Qtech(config)#interface cellular 0/0
Qtech(config-if-Cellular 1)# apply detect interface vlan 10 bfd
Qtech(config-if-Cellular 1)# show running-config interface cellular 0/0
Building configuration...
Current configuration : 65 bytes
!
interface Cellular 0/0
apply detect interface vlan 10 bfd
1.2.5
Associating 4G Interface with Dial Stimulation (Interesting Traffic) Rule
1.2.5.1 Configuration steps
Step Configuration Task Description
1 Dial Stimulation (Interesting Traffic) Rule of
4G Interface Association Optional
1.2.5.2
Configuring Association with Master Interface Protocol Status
Command Description
Qtech# configure terminal Enters the global configuration mode.
Qtech(config)# interface cellular 0/0 Enters the interface configuration mode.
Qtech(config-if-Cellular 1)# apply detect dial-list { list_id |
list_name [idle-timeout seconds] Configures the association of the 4G link with the dial
stimulation (interesting traffic) rule.
Example: Configure the association with the interesting traffic rule with the ACL ID of 100.
Qtech(config)#interface cellular 0/0
Qtech(config-if-Cellular 1)# apply detect dial-list 100
Qtech(config-if-Cellular 1)# show running-config interface cellular 0/0
Building configuration...
Current configuration : 65 bytes
!
interface Cellular 0/0
apply detect dial-list 100
1.2.6 Configuring 4G Backup
1.2.6.1 Configuration steps
Step Configuration task Description
1 Configuring 4G Backup Function Optional
1.2.6.2
Configuring 4G Backup Function
Command Description
Qtech# configure terminal Enters the global configuration mode.
Qtech(config)# interface cellular 0/0 Enters the interface configuration mode.